Supporting Image
Jun 1, 2018 0    
Phase-change memory
Melting and Freezing Bits and Bytes

In the last decade, demand for faster, non-volatile computer memory—memory that keeps its state even when power is lost—has spawned interest in a data storage method called phase-change memory (PCM). This kind of memory has been used for many years to store data on rewritable CDs and DVDs, but so far, the large energy required to change the state of the material has made it impractical to use in electronic memory devices. If this challenge can be overcome, phase-change memory can be integrated with conventional silicon electronics for high-capacity data storage and more efficient computation.

PCM uses chalcogenide-based glass materials—those containing the elements sulfur, selenium, or tellurium (Figure 1) —which can be rapidly and repeatedly switched between a disordered phase and an ordered phase. These phases are easy to distinguish based on their optical and electrical properties. The disordered amorphous phase has low optical reflectivity (reflects little light) and high electrical resistance (is a poor conductor of electricity). The ordered crystalline phase, by contrast, has high optical reflectivity (reflects more light) and low electrical resistance (is a good conductor of electricity).

The existence of two distinct phases enables us to store data in the material by assigning one phase the role of “0” and the other the role of “1” in the familiar binary computing code. In other words, the contrasting properties of the amorphous and crystalline phases provide the vocabulary in which data can be “read.” Rewritable CDs, DVDs, and Blu-Ray discs rely on the optical contrast between phases to read data, as shown in Figure 2, while electronic PCM reads data from the differences in electrical resistance. In order to “write” data this way, however, we need to be able to control switching between phases of the material in a quick and precise way.

In PCM, nanoscale volumes of a phase-change material are heated by very short electrical pulses (Figure 3). To switch from the crystalline to the amorphous phase, the material is melted and cooled very quickly (~1 nanosecond, or one billionth of a second) so it ‘freezes’ in its disordered state. To switch from the amorphous to the crystalline phase, the element is heated to a lower temperature for a longer time (~10-100 nanoseconds), allowing the atoms to arrange themselves in a stable, ordered structure (Figure 4). Below ~100 Celsius (the temperature at which water boils), the material does not have enough energy to crystallize; this is what makes PCM a non-volatile memory, stable at room temperature and even at the higher temperatures reached in computer chips.

One of the key challenges of PCM, however, is the large amount of power required to heat the material enough to melt or crystallize it. Another difficulty is a phenomenon called resistance drift, in which the electrical resistance of the amorphous phase slowly increases over time and then decreases. Since electronic PCM relies on the electrical resistance of the material to store and read data, resistance drift negatively impacts the reliability of computer memories using PCM. Finally, when the material is melted and re-solidified many millions of times, as data is repeatedly rewritten in computer memories, the integrity of its nanoscale structure starts to degrade, and the devices become less reliable.

To overcome these challenges, we are working to gain a better understanding of the crystalline-amorphous transition, including the possibility of pre-melt or electronic amorphization—that is, getting the material hot enough to become disordered without melting and re-freezing it, which may reduce power requirements. We are also working to uncover the physical mechanisms behind the resistance drift of the amorphous phase. We use electrical measurements, together with electron microscope images of PCM devices, to better understand how the electrical properties of the material correlate with its nanostructure, and how this in turn results from different programming (heating and cooling) conditions. A better understanding of the crystallization and amorphization processes, the voids that form after repeated heating and cooling, and segregation of the elements (Ge, Sb, or Te) within the chalcogenide compound can be used to build PCM devices with higher performance and reliability.

Fig. 1 (Click to enlarge). The chalcogens are found in group 16 of the periodic table.
Fig. 1 (Click to enlarge). The chalcogens are found in group 16 of the periodic table.
Fig. 2 (Click to enlarge). Schematic of a Blu-Ray disc from Friso Jedema:
Fig. 2 (Click to enlarge). Schematic of a Blu-Ray disc from Friso Jedema: "The laser light is produced by a light-emitting diode (1) and subsequently focused by a lens (2) onto the phase-change layer, buried inside the rewritable disc. The reflected light is directed towards a photo detector (3). The inset represents a transmission electron microscope picture of written amorphous bits in a crystalline phase change layer." (Nature Materials 6, 90–91 (2007), doi:10.1038/nmat1832)
Fig. 3 (Click to enlarge). Simulation of the initial crystallization of the amorphous chalcogenide glass layer, followed by a programming Reset-Set cycle. The light pink represents the amorphous layer between two electrical contacts—a larger top contact and a smaller bottom contact, shown in grey. The colorful regions are the grains that form and grow during crystallization. When a
Fig. 3 (Click to enlarge). Simulation of the initial crystallization of the amorphous chalcogenide glass layer, followed by a programming Reset-Set cycle. The light pink represents the amorphous layer between two electrical contacts—a larger top contact and a smaller bottom contact, shown in grey. The colorful regions are the grains that form and grow during crystallization. When a "reset" pulse is applied between the two contacts, the region with the highest current density melts (dark pink); after the pulse ends, this region freezes as amorphous again (light pink), leading to a high electrical resistance between the two contacts. A longer, less intense "set" pulse then brings the element above the material's crystallization temperature but below its melting point, so the cell becomes fully crystallized - low electrical resistance - once again. The two resistance states are interpreted as a 0 and 1 (See below for full-size video.)
Fig. 4 (Click to enlarge). A 3D simulation of the PCM crystallization process. The different colors represent the different spatial orientations of individual crystal grains. (See below for full-size video.)
Fig. 4 (Click to enlarge). A 3D simulation of the PCM crystallization process. The different colors represent the different spatial orientations of individual crystal grains. (See below for full-size video.)
TAGS: #crystallization    #crystals    #electronics    #memory    #nanoelectronics    
 
SHARE THIS POST:

Related Posts

05/19
Supporting Image
Supporting Image
Electric Crystals, Part 3

Students make paper models of crystal unit cells and build a large crystal structure together while reflecting on the role of symmetry in crystal formation. This lesson is part 3 of a 4-part student-driven, lecture-free series, in which students will do card sorts, build hands-on models, solve engineering design puzzles, and more!

0 0    
05/18
Supporting Image
Supporting Image
Electric Crystals, Part 1

Crystals aren't magic, but they are amazing! In this engaging, comic-driven lesson, students do individual and group-based activities to understand the characteristics of crystals (like quartz) versus amorphous solids (like glass). This lesson is part 1 of a 4-part student-driven, lecture-free series in which students will do card sorts, build hands-on models, solve engineering design puzzles, and more!

0 0    

More Funsize Research

04/20
Supporting Image
Supporting Image
Fluids and filling

You take a pristine-looking Oreo from a package of seemingly identical sandwich cookies, and you decide to open it up to eat the creme filling first. You gently twist the cookie apart without breaking the chocolate wafers, but the creme sticks to one side only. Why? Happily, the physics of fluids helped two MIT students solve this delicious mystery. Read on to find out what they learned, and how you can test their results at home.

0 0    
05/12
Supporting Image
Supporting Image
Laser memory

Instead of pencil, paper, and eraser, we can use combinations of lasers and magnetic materials to write, read, and and erase information by varying the temperature and magnetic field. Here we apply our laser "pencil" to magnetic "paper" to write the letter “N” (Go Huskers!!). This technique allows us write, erase, and rewrite tiny magnetic memories like those found in your computer hard drive and other devices. Click to learn how it works!

0 0    
04/20
Supporting Image
Supporting Image
Thermalizing nanowires

It’s a hot summer day. You desperately want something cold to drink, but unfortunately, your bottle of root beer has been sitting in a hot car all day. You put it into a bucket full of ice to cool it down. But it’s taking forever! How, you wonder, could you speed the process up? The same question is important for understanding how electronic devices work, and how we can make them work better by controlling the temperature of the electrons that power them. Read on to find out what a bottle of root beer in a cooler full of ice and a nanowire in a vat of liquid helium have in common!

0 0    
02/23
Supporting Image
Supporting Image
World's smallest diode

Diodes, also known as rectifiers, are a basic component of modern electronics. As we work to create smaller, more powerful and more energy-efficient electronic devices, reducing the size of diodes is a major objective. Recently, a research team from the University of Georgia developed the world's smallest diode using a single DNA molecule. This diode is so small that it cannot be seen by conventional microscopes.

0 0    
02/01
Supporting Image
Supporting Image
Liquid magnetism
by Robert Streubel, Scott Schrage

You may have heard that there are three main phases of matter: solids, liquids, and gases (plus plasma if you want to get fancy). Liquids can take virtually any shape and deform instantly. Solid materials possess interesting electronic and magnetic properties essential to our daily life. But how about designing rigid liquids with magnetic properties? Impossible? Not anymore. Click to learn more!

0 0    
12/08
Supporting Image
Supporting Image
Nanoscale fluid mechanics

We think we're pretty familiar with how ordinary liquids behave, but it turns out that some of the basic things we know are no longer true when we look at these liquids on short enough length scales and fast enough time scales. The liquids start to behave more like solids, pushing back when you push on them, and slipping across solid surfaces instead of being dragged along. Click to ride the tiny-but-mighty new wave of nanofluidics!

0 0    
11/05
Supporting Image
Supporting Image
Building a better computer
by Peter Dowben, Jocelyn Bosley

Scientists are working to develop electronic devices that store and process information by manipulating a property of electrons called spin—a research area aptly known as spintronics. The semiconductors we are developing will not only be faster and cheaper than those used in conventional devices, but will also have more functionality.

1 1    
11/05
Supporting Image
Supporting Image
Good vibrations

Materials that are absolutely perfect—in other words, materials that contain no defect of any kind—are usually not very interesting. Imagine being married to a saint: you would quickly be bored out of your mind! Defects and impurities can considerably change many properties of materials in ways that allow a wide range of applications.

0 0    
11/05
Supporting Image
Supporting Image
Secrets of semiconductors

Semiconductors are materials with properties intermediate between metals and non-conducting insulators, defined by the amount of energy needed to make an electron conductive in the material. The non-conducting electrons occupy a continuum of energy states, but two of these states (the “heavy hole” and “light hole”) are nearly identical in energy. The heavy hole is easy to observe and study, but the light hole eludes most observers.

0 0    
11/05
Supporting Image
Supporting Image
Locking up electrons

Solids are generally divided into metals, which conduct electricity, and insulators, which do not. Some oxides straddle this boundary, however: a material's structure and properties suggest it should be a metal, but it sometimes behaves as an insulator. Researchers at the University of California, Santa Barbara are digging into the mechanisms of this transformation and are aiming to harness it for use in novel electronic devices.

0 0    
11/05
Supporting Image
Supporting Image
Nanomagnetism

You may know that the media used in magnetic recording technologies, such as computer hard drives, are made of millions of tiny nanomagnets. Each nanomagnet can be switched up or down to record bits of information as ones and zeros. These media are constantly subjected to magnetic fields in order to write, read, and erase information. If you have ever placed a magnet too close to your laptop or cell phone, you know that exposure to an external magnetic field can disrupt information stored this way. Did you know that it is possible for the nanomagnets to "remember" their previous state, if carefully manipulated under specific magnetic field and temperature conditions? Using a kind of memory called topological magnetic memory, scientists have found out how to imprint memory into magnetic thin films by cooling the material under the right conditions.

0 0    
11/05
Supporting Image
Supporting Image
Slow reflection

Inside solids, the properties of photons can be altered in ways that create a kind of "artificial gravity" that affects light. Researchers at the University of Pittsburgh tracked photons with a streak camera and found that whey they enter a solid-state structure, they act just like a ball being thrown in the air: they slow down as they move up, come to a momentary stop, and fall back the other way. Studying this "slow reflection" will allow us to manipulate light's behavior, including its speed and direction, with potential applications in telecommunications and quantum computing technologies.

0 0    
11/05
Supporting Image
Supporting Image
Superfluid helium droplets

In a unique state of matter called a superfluid, tiny "tornadoes" form that may play an important role in nanotechnology, superconductivity, and other applications. Just as tornadoes are invisible air currents that become visible when they suck debris into their cores, the quantum vortices in superfluids attract atoms that make the vortices visible. Quantum vortices are so small they can only be imaged using very short-wavelength x-rays, however.

0 0    
11/05
Supporting Image
Supporting Image
Magnetic anisotropy

Would you rather have data storage that is compact or reliable? Both, of course! Digital electronic devices like hard drives rely on magnetic memory to store data, encoding information as “0”s and “1”s that correspond to the direction of the magnetic moment, or spin, of atoms in individual bits of material. For magnetic memory to work, the magnetization should not change until the data is erased or rewritten. Unfortunately, some magnetic materials that are promising for high density storage have low data stability, which can be improved by squeezing or stretching the crystal structures of magnetic memory materials, enhancing a material property called magnetic anisotropy.

0 0    
11/05
Supporting Image
Supporting Image
Detecting neutron radiation

Neutron radiation detection is an important issue for the space program, satellite communications, and national defense. But since neutrons have no electric charge, they can pass through many kinds of solid objects without stopping. This makes it difficult to build devices to detect them, so we need special materials that can absorb neutrons and leave a measurable signature when they do. Researchers at the University of Nebraska-Lincoln are studying the effects of solar neutron radiation on two types of materials on the International Space Station (ISS), using detectors made of very stable compounds that contain boron-10 and lithium-6.

0 0    
11/05
Supporting Image
Supporting Image
Printable perovskites

To increase our use of solar energy, we need to create more efficient, stable, and cost-effective solar cells. What if we could use an inkjet printer to fabricate them? A new type of solar cell uses a class of materials called perovskites, which have a special crystal structure that interacts with light in a way that produces an electric voltage. We've developed a method to produce perovskite thin films using an inket printer, which in the future could pave the way to manufacture solar cells that are surprisingly simple and cheap.

0 0    
09/30
Supporting Image
Supporting Image
Computing with fool's gold?

Fool's gold is a beautiful mineral often mistaken for gold, but recent research shows that its scientific value may be great indeed. Using a liquid similar to Gatorade, it can be turned into a magnet at the flick of a switch! Read on to learn more!

0 0    

WRITE COMMENT

Go to Top